ZF8HP70 Transmission Swap Upgrade Kit (Gen1 B58)
ZF8HP70 Transmission Swap Upgrade Kit (Gen1 B58)
ZF8HP70 Transmission Swap Upgrade Kit (Gen1 B58)
ZF8HP70 Transmission Swap Upgrade Kit (Gen1 B58)

ZF8HP70 Transmission Swap Upgrade Kit (Gen1 B58)

Regular price$3,200.00
/
Shipping calculated at checkout.

Drive
Shipping
Required Coding
  • Worldwide Shipping

 

 **KIT INCLUDES TRANSMISSION ITSELF**

We Are Proud To Announce we will be stocking ZF8HP70 Direct Swap Kits Here In The States!! These kits will come with everything you need to bolt on an hp70 upgrade directly to a RWD car! And the needed driveshaft components for X-drive! Xdrive customers will just need their shop to fab a trans mount! Kit Will include imported ZF8HP70, Torque Converter (higher stall), Rear Trans Mount, Flywheel, and optional Coding Service for the Install! **NO CORE NEEDED** Because we are buying and storing in bulk we are able to allow our customers the complete kit for basically the same cost it would take to get just the transmission itself shipped from Europe!

RWD kits come with Rear mount and Flywheel for plug and play install

X-Drive kits come with custom strengthened Front Drive shaft, and Rear Drive shaft Spacer for plug and play install, you just need to fab a mount as the location is about an inch forward.

We STRONGLY Recommend Running ADRENALINE R SERIES SPEED SHIFT TRANSMISSION FLUID in your hp70, tested to be a Huge upgrade over oem fluid. We run it in our Shop 340 with hp70 and shop G80 with Hp76. Proven to hold higher power/torque output and keep clutches healthy and temps low

Please install a new pan/filter kit and fluid during your swap!! FCP EURO Has the Pan and fluid available!

The HP70 Trans is rated for loads more of torque and hp as it is the stock trans in the diesel BMW's holding up to even tuned diesels! Vs our HP50's measly 500nm rating that we start to see catastrophic failures around 600-650ftlbs.

We supply all needed parts to carry out this upgrade for RWD Cars as a turn key solution, and even have a shop In Redmond Oregon Prepared to do install for those interested!!

Our Coding option is available by BimECU The leading company in bmw coding/programming. They will Remotely code the new transmission into your bmw, for coding you would need a laptop with windows, and ENET cable (or MG/MHD  Black WIFI adapter + Ethernet cable) and a Good internet connection, not the phone hotspot. BimECU will take care of the rest!

**THE FREIGHT DELIVERY REQUIRES A COMMERCIAL/BUSINESS ADDRESS** Orders will be canceled for shipping information provided to residential addresses. (If you are planning to install yourself ask a business/your place of work/Or your buddies shop to accept the delivery for you before hand)

For Shipping Requests Outside of the Lower 48 States Please contact us via support chat or message us on Instagram here.

Please Note!! These are Imported USED Transmissions, our supplier attempts to source trans' with 30k miles or less! The Transmissions are Pulled in Good quality/Working condition but as these are used and imported we can not Warranty or Return these items. It is in our best interest to provide the best quality products and we have yet to see a failed unit from the supplier.

BimmerNetwork operates both with inventory stocked on hand, and through shipping items from our vendors. By making a purchase from BimmerNetwork, you accept that orders will ship upon availability and inventory status with our, and our vendors products.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.